Surface of room temperature ionic liquid [bmim][PF6] studied by polarization- and experimental configuration-dependent sum frequency generation vibrational spectroscopy

Understanding and control of the surface properties such as molecular orientations are of great importance in numerous applications of ionic liquids. However, there remain discrepancies among the previous experimental and theoretical studies on the surface orientation and structures of room temperature ionic liquids(RTIL) systems. In this article, the orientation of 1-butyl-3-methylimidazolium([bmin]) cation at the air/liquid interface of a characteristic RTIL, 1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]), was investigated by the sum frequency generation vibrational spectroscopy(SFG-VS). Detailed polarization and experimental configuration analyses of the SFG-VS spectra showed the possibility of a small spectral splitting in the CH3 symmetric stretching region, which can be further attributed to the probable existence of multiple orientations for the interfacial [bmim] cations. In addition, the(N)–CH3 vibrations were absent, ruling out the prediction by several recent molecular dynamics simulations which state that portions of the [bmim] cations orient with a standing-up(N)–CH3 group at the ionic liquid surface. Hence, new realistic theoretical models have to be developed to reflect the complex nature of the ionic liquid surface.     

Ratiometric mode with dyads: a breakthrough in dynamic trapping and quantification for redox regulation in living cells

Redox-based post-translational modification of protein thiols has become an attractive strategy in cellular homeostasis and cell signaling.Due to the reductive end of the redox buffer network,the vicinal dithiol-containing proteins(VDPs)maintains an appropriate oxidation-reduction state of proteins through the reversible transformation from vicinal dithiols to disulfide,which is responsible for a variety of     

各向异性本构关系在板料成形数值模拟中的应用

对几种能表达面内各向异性的屈服准则Hill、Barlat-Lian、Barlat进行了比较。以弹性变形服从各向同性广义虎克定律的情况下，给出了基于张量算法推导的弹塑性本构关系的一般表达式，并由此导出了相应屈服准则的弹塑性本构关系的显式表达。借助ABAQUS软件本构模块用户子程序接口，分别实现了这些屈服准则在ABAQUS的嵌入。以模拟方形盒的拉延过程为例，分析了不同的屈服准则在板料成形过程数值模拟中的应用。模拟结果表明，基于弹塑性本构关系一般表达所列出的相应屈服准则的显式表达式是正确的；在采用壳元来模拟板料成形时，采用Barlat准则的模拟结果和采用Barlat-Lian准则的结果差别不大。     

不同年龄段天然牙的摩擦磨损行为研究

采用往复滑动摩擦磨损试验台考察了不同年龄段的天然牙同钛合金配副时的摩擦学性能.结果表明:天然牙的摩擦磨损行为同年龄密切相关,早期和中期恒牙的摩擦磨损行为相似,磨损表面主要呈现轻微擦伤迹象,中期恒牙的抗磨性能最佳;乳牙及晚期恒牙的摩擦系数变化波动较大,抗磨性能不佳,磨损表面主要呈现严重犁削和剥落特征.     

INFLUENCE OF ASIAN DUSTS ON THE PHYSICOCHEMICAL PROPERTIES OF ATMOSPHERIC AEROSOLS IN TAIWAN DISTRICT USING THE PENGHU ISLANDS AS AN EXAMPLE

1. Introduction In the early months of each year, Asian dusts transport frequently from Northwest China and Mongolia to the Pa-cific-Rim countries (Kagawa et al., 2001; Uno et al., 2002). It causes significant environmental effects such as ambient air quality deterioration, atmospheric visibility impairment, radiation energy reduction, mineral deposition, and acid rain neutralization (Terada et al., 2002; Zhang & An, 1999). During Asian dust periods, significant increases of atmos-pheric …     

跳马项目的三维实时动态测量系统

为跳马项目研究的电测系统中引入数字信号处理的传递函数及频谱分析的方法,采集和处理了因人体冲击三维力对信号的耦合干扰造成的十分复杂的响应信号,具有较高的动态测试精度.可以获得跳马动作的全部运动生物力学参数.现已用于中国国家体操队进行计算机辅助训炼.     

La_2O_3和WSi_2增强MoSi_2基复合材料的摩擦磨损性能研究

选用MRH-5A型环-块摩擦磨损试验机测定了3种载荷和2种转速条件下La2O3和WSi2增强MoSi2基复合材料在滑动干摩擦时的摩擦磨损性能,采用扫描电子显微镜分析了复合材料磨损表面形貌.结果表明:La2O3和WSi2增强MoSi2基复合材料的抗磨性能优于MoSi2及WSi2/MoSi2材料;当载荷与速度乘积(pv)值小于183.04N·m/s时,La2O3和WSi2增强MoSi2基复合材料的磨损质量损失仅为相同条件下MoSi2的1/4～1/6和WSi2/MoSi2的1/2;这是由于La2O3和WSi2复合增强相存在硬化和韧化协同作用所致;随着pv值增加,La2O3和WSi2增强MoSi2基复合材料依次呈现犁削、粘着磨损和疲劳磨损特征.     

EFFECTS OF FINELY DISPERSED METALLIC PALLADIUM ON MICROSTRUCTURE AND PROPERTIES OF NANOCOMPOSITES PRODUCED BY SOL-GEL TECHNIQUE

Nanosized palladium particles were incorporated into mesoporous silica matrix to obtain nanocomposites using the sol-gel technique. Effects of the finely dispersed metallic palladium on the microstructure and properties of the nanocomposites were investigated. By means of X-ray diffraction and optical absorption, it was found that palladium particles were 5-9 nm in diameter and their uniform dispersion in the mesoporous silica depended on both the content of the palladium and the structural features of the silica matrix. The results showed that the mixing method of preparation led to wider size distribution of the nanosized particles as compared to the immersion method, but dispersed degree was reduced. Although the incorporation of nanosized palladium particles could not substantially induce significant structural changes of the matrix, the apparent red-shifted optical absorptions for the nanocomposites were observed as compared to the parent monolithic silica, particularly with increase in palladium loading and calcination temperature.     

非保守圆薄板的轴对称振动和稳定性

建立了受切向均布随从力作用的圆薄板在面内周边可移、不可移两种情况下的轴对称控制方程，用打靶法直接导出求解变系数常微分方程特征值问题数值解的计算式．通过数值计算，给出了周边可移、不可移的简支、固支圆板自振频率和临界载荷的特征曲线以及相应的临界发散载荷，并分析了泊松比对圆板自振频率和临界载荷的影响．     

反射焦散线实验中斜入射光对应力强度因子测试精度的影响

本文用空间解析几何方法,推导了在一般非平行斜入射光条件下,裂纹体表面所形成的反射焦散线和初始曲线的方程.分析了倾斜入射光造成的焦散线畸变,给出了这种畸变造成的裂端应力强度因子测量误差的解析表达式.